Part Number 80-1230-9 10/10 55
SN012/SN020/SF0400/SN0450/SF0600/SN0650/
SF0900/SN0950/SF1200/SN1250
Procedure to Clean Heavily Scaled Flake/Nugget
Ice Machines
Ice machines that are heavily scaled or have not been
cleaned on a regular basis will need to run this
Procedure. Failure to do so may result in binding of the
auger as the lime scale releases from the auger and
evaporator barrel.
Step 1 Remove panels and set the ICE/OFF/CLEAN
toggle switch to the OFF position.
Step 2 Remove all ice from the bin.
Step 3 Turn off the water supply to the ice machine.
Step 4 Place ICE/OFF/CLEAN toggle switch in the
CLEAN position. The dump valve will open and drain
the water from the evaporator and reservoir.
Step 5 Wait approximately 30 seconds (or until the
evaporator is drained) and place the toggle switch in
the OFF position.
Step 6 Refer to chart and add the correct amount of
cleaner for your model ice machine.
Model
Amount of Cleaner
Part Number 000000084
SN12 SN20
16 ounces (473 ml)
SF0400 SN0450
SF0600 SN0650
SF0900 SN0950
SF1200 SN1250
32 ounces (950 ml)
SF2000 SN2050
To Next Page
Loading...
Need help?
General
