Part Number 80-1230-9 10/10 69
Bin Door Removal
Door removal allows easier access for cleaning and
sanitizing.
1. Disconnect the electrical power to the ice
machine and remove ice from bin.
2. Grasp the rear of the bin door and pull bin door
forward approximately 5”.
3. Slide bin door to the rear while applying upward
pressure (the rear door pins will ride up into the
track slot).
4. Slide the rear door pins off the end and then
below the door track. Slide bin door forward
allowing the back of the door to lower into the bin.
Continue forward with the bin door until the front
pins bottom out in the track.
5. Lift the right side of the bin door until the front pin
clears the track.
6. Remove door from bin.
To Next Page
Loading...
