Part Number 80-1505-3 6/11 93
G. Remove the water pump.
• Note position of water pump outlet, and then
disconnect vinyl hose from the pump outlet.
• Rotate the thumbscrew that secures the pump to
the bulkhead 1/4 turn clockwise.
• Rotate the water pump assembly 1/4 turn
counterclockwise.
• Lower the pump assembly into the evaporator
compartment.
• Disconnect the water pump power cord.
• Remove water pump assembly from ice
machine.Do not soak the water pump motor in
cleaner or sanitizer solution
H. Remove the bin thermostat probe
• Loosen the 2 screws that holds the probe in place.
The probe can easily be cleaned at this point
without complete removal.
NOTE: Proceed to page 101, Step 7.
To Next Page
Loading...
Need help?
General