Mankati FULLSCALE XT PLUS - Page 52

www.mankati.com
50
How to tighten the belts?
How To
1. Loosen the screw on the
synchromesh gear which
drives the corresponding
beltyouwanttotighten.
2. Hold the belt’s end
reaching out from the
black sliding block with a
clamp.
3. Loosen the screws
on the sliding block
with the L-shape
wrench, then use a
clamp to tighten the
beltproperly.Finally,
lock the screws back
on sliding block and
synchromeshgear.