Why is there no sound produced from front wide speaker on my Marantz AV7005 Tuner?
If no sound is coming from the front wide speaker when using your Marantz Tuner, check that: * “Amp Assign” on the menu is set to “Normal.” * “Speaker Config.” – “F.Wide” on the menu is set to something other than “None.”
How to stop HDMI control operations from affecting my Marantz Tuner?
If operations on HDMI-CEC compatible devices are causing the same operations to occur on your Marantz Tuner, try these solutions: * Set “HDMI Control” on the menu to “OFF.” * To only control power for each device individually, set “Power Off Control” to “OFF.”
General| Audio decoders | Dolby Digital, Dolby Digital Plus, Dolby Pro Logic IIz, Dolby TrueHD, DTS, DTS-ES |
|---|---|
| Amplifier class | - |
| Frequency range | 20 - 20000 Hz |
| Audio output channels | 7.1 channels |
| Peak power per channel | - W |
| Signal-to-Noise Ratio (SNR) | 102 dB |
| Total Harmonic Distortion (THD) | - % |
| AC (power) in | Yes |
| Audio (L/R) in | 7 |
| Audio (L/R) out | 6 |
| USB 2.0 ports quantity | 1 |
| Digital audio optical in | 3 |
| Speakers connectivity type | RCA |
| Purpose | Home |
| Product color | Black |
| Volume control | Rotary |
| Cables included | AC |
| Connectivity technology | Wired |
| Power consumption (standby) | 0.2 W |
| Power consumption (typical) | 750 W |
| THX-certified | No |
Weight and Dimensions| Depth | 406400 mm |
|---|---|
| Width | 440 mm |
| Height | 184.5 mm |
| Weight | 13000 g |
To Next Page
