To Next PageTo Next PageWhy is there no output to Subwoofer Out on my Marantz AV8003?
If there is no output to the Subwoofer Out on your Marantz Amplifier, check if 'Subwoofer = NONE' has been selected in SETUP mode. If so, select 'Subwoofer = YES'.
What to do if I cannot get programmed station when the PRESET button is pressed on my Marantz AV8003?
If you cannot get programmed station when the PRESET button is pressed on your Marantz Amplifier, the preset data may have been erased. Disconnecting the power plug for long periods of time will erase preset data. If that happens, input the preset data again.
Why can't I select CSII mode on my Marantz AV8003?
If you're unable to select CSII mode on your Marantz Amplifier, it's likely that the input signal is incompatible. Use a 2 channel Dolby Digital input signal, PCM input signal, or analog input signal.
Why can't I select Neo:6 mode on my Marantz Amplifier?
If you're unable to select Neo:6 mode on your Marantz Amplifier, it's likely that the input signal is incompatible. Use a 2 channel DTS input signal, PCM input signal, or analog input signal.
Why can't I select Pro Logic IIx mode on my Marantz Amplifier?
If you're unable to select Pro Logic IIx mode on your Marantz Amplifier, it's likely that the input signal is incompatible. Use a 2 channel Dolby Digital input signal, PCM input signal, or analog input signal.
Why can't I select EX/ES mode on my Marantz Amplifier?
If you cannot select EX/ES mode on your Marantz Amplifier, it could be due to: * 'Surround center = NONE' being selected in SPEAKERS SIZE SETUP. Make the correct setting. * The input signal being incompatible. Use a 5.1channel source.
Why is noise heard during FM reception on my Marantz AV8003 Amplifier?
If you're experiencing noise during FM reception on your Marantz Amplifier, it could be because the radio waves from the broadcasting station are weak. Consider installing an FM outdoor antenna.
Why is noise heard during AM reception on my Marantz AV8003?
If you hear noise during AM reception on your Marantz Amplifier, it might be due to reception being affected by other electrical fields. Try changing the location where the AM indoor antenna is set up.
Why is FM or AM reception failing on my Marantz AV8003?
If FM or AM reception is failing on your Marantz Amplifier, the antenna connection may be incomplete. Correctly connect the indoor FM and AM antennas to the FM and AM antenna outlets.
How to troubleshoot no audio output from the surround back speakers on Marantz AV8003 Amplifier?
If there is no audio output from the surround back speakers on your Marantz Amplifier, consider the following: * Ensure the power amp and speakers are connected correctly, referring to the connection diagram. * The surround mode may not be EX/ES mode. Set surround mode to EX/ES. * Verify that 'Surround back = NONE' has not been selected in SPEAKERS SIZE SETUP. Make the correct setting if needed.
Technical specifications for the FM tuner, including frequency range and sensitivity.
Technical specifications for the AM tuner, including frequency range and selectivity.
HDMI version and specifications for input and output.
Technical specifications for audio inputs, outputs, and frequency response.
Technical specifications for video formats, levels, and frequency response.
Power requirements, consumption, and weight of the unit.
Physical dimensions of the AV Pre Tuner in inches and millimeters.
List of accessories provided with the AV Pre Tuner.
Unit automatically detects and selects the optimal surround mode based on input signal.
Modes that bypass processing for purer audio or reduced noise.
Provides 6.1 channel surround for Dolby Digital EX and DTS-ES sources.
Explains Dolby Digital, Pro Logic IIx, and GAME modes.
Covers DTS, Neo:6 Cinema/Music, and 96/24 formats.
Details THX Cinema, Surround EX, ULTRA2 Cinema, and Music modes.
Covers THX Games and Neural Surround technologies.
Important notes regarding DTS, Dolby Digital EX, PCM, and HDCD playback.
Explains THX standards and technologies for movie soundtracks.
Details joint development of Dolby Labs and THX Ltd. for surround sound.
Proprietary THX technology for optimal surround sound experience.
Feature to improve bass balance and reduce room acoustics issues.
Advanced surround technology for music and stereo material delivery.
Premium quality discrete multichannel digital audio for movies and music.
Immersive 7.1-channel listening experience for stereo and 5.1 sources.
Creates virtual surround sound using only two speakers.
Step-by-step instructions to enter the service mode.
Displays software versions for various internal components.
Resets unit settings to factory defaults by holding ZONE and TOP buttons.
Identifies communication errors with the EEP-ROM.
Detects abnormalities in ±15V and +5VD power supplies.
Details timing signals required for normal operation startup.
Lists HD Radio error detections and corresponding check points.
Instructions for saving and restoring arbitrary product settings.
Procedure to clear Dual Backup Memory after component replacement.
Procedure to update/download software for the MAIN CPU.
Procedure to update/download software for the DSP.
Procedure to update/download software for the HDMI CPU.
Procedure to update/download software for the HD Radio CPU.
Procedure to update/download software for the HD Radio Module.
Procedure to update/download software for the DMP Sub CPU.
Lists required items for firmware updating/downloading.
Visual guide to component placement on various PWBs.
Visual guide to component placement on XM PWBs (U Only).
Diagram showing the physical assembly and breakdown of the unit.
Detailed list of all parts with part numbers and descriptions.
Details pin functions, modes, and descriptions for the HD64F36049HV IC.
Details pin functions, modes, and descriptions for the M3087BFKBGP IC.
Details pin functions and modes for the HD Radio CPU.
Lists terminal functions and descriptions for the TMS320DA788 DSP.
Details pin functions and descriptions for the ADV7403 Video Scaler IC.
List of resistors with their part numbers and specifications.
List of ceramic capacitors with their part numbers and specifications.
List of electrolytic capacitors with their part numbers and specifications.
List of film capacitors with their part numbers and specifications.
Guidelines for checking software contents after microprocessor or flash ROM replacement.
General| Pre-out channels | 7.1 |
|---|---|
| Pre-out connectivity | Yes |
| Audio output channels | 7.1 channels |
| Signal-to-Noise Ratio (SNR) | 105 dB |
| Power output per channel (20-20KHz@8 Ohm) | - W |
| HDMI in | 4 |
| Audio (L/R) in | 6 |
| Digital audio optical in | 3 |
| Ethernet LAN (RJ-45) ports | 1 |
| Number of HDMI outputs | 2 |
| Connectivity technology | Wired |
| Speakers connectivity type | RCA |
| Audio formats supported | MP3, WAV, WMA |
| Image formats supported | JPG |
| Wi-Fi | No |
| Supported radio bands | AM, FM |
| Supported video modes | 1080p |
| Supported graphics resolutions | 1920 x 1080 (HD 1080) |
| Display | LCD |
| HDMI version | 1.3a |
| Product color | Black |
| Audio decoders | Dolby Digital EX, Dolby Digital Plus, Dolby Pro Logic IIz, Dolby TrueHD, DTS, DTS 96/24, DTS-ES, DTS-HD, DTS-HD Master Audio, THX Surround EX |
| Apple docking compatibility | Not supported |
| Power consumption (standby) | 0.7 W |
| Power consumption (typical) | 85 W |
| Cables included | AC |
Weight and Dimensions| Depth | 385 mm |
|---|---|
| Width | 440 mm |
| Height | 184.5 mm |
| Weight | 11600 g |
