Marantz M-CR503 - Connecting the Power Cord

11
Getting Started Basic Connections
Basic Connections Advanced ConnectionsBasic Operations Advanced Operations TroubleshootingExplanation terms Specifi cations Index
ENGLISH
n AM loop antenna assembly
1
Put the stand section
through the bottom of
the loop antenna from
the rear and bend it
forward.
Loop
antenna
Stand
Square
hole
Projecting
part
2
Insert the projecting part
into the square hole in
the stand.
n Using the AM loop antenna
Suspending on a wall
Suspend directly on a wall without assembling.
Nail, tack, etc.
Standing alone
Use the procedure shown upper to assemble.
Connecting an antenna
Connecting the power cord
Power cord (Supplied)
To household power outlet
(AC 230 V, 50/60 Hz)
NOTE
• Only use the supplied power cord.
• Be sure the power cord is unplugged from the power outlet before
connecting or disconnecting it to the AC IN.
1.M-CR503NENG4th0610.indd111.M-CR503NENG4th0610.indd11 2010/06/1118:24:162010/06/1118:24:16