EasyManua.ls Logo

Marantz M-CR503 - Setting the Current Time (24-Hour Display); Operations Possible During Playback; Adjusting the Master Volume; Input Source Switching

Marantz M-CR503
43 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
13
Getting Started Basic Connections
Advanced ConnectionsBasic OperationsBasic Operations Advanced Operations TroubleshootingExplanation terms Specifi cations Index
ENGLISH
Setting the current time
(24-Hour Display)
GExampleH Setting the current time to 10:15 am
1
Press ON/STANDBY to turn the power on.
2
Press [MENU] or press <MODE> for 3 or more seconds.
Various types of setting menus are displayed.
3
Use ui to select “CLOCK SETUP”, then press
[ENTER/MEMO], <ENTER> or [p].
MENU
CLOCK SETUP
4
Use ui to set the “hours”.
CLOCK SETUP
10:00
5
Press [ENTER/MEMO], <ENTER> or [p].
The “minutes” display fl ashes.
6
Use ui to set the “minutes”.
CLOCK SETUP
10:15
7
Press [ENTER/MEMO], <ENTER> or [p].
The current time is set, and the normal display reappears.
n Checking the current time when the power is on
Press [CLOCK].
Press once more and the display returns to its original condition.
n Checking the current time when the power is
set to standby
Press [CLOCK].
The current time is displayed for 10 seconds.
NOTE
The time cannot be set when in the standby mode. Turn on the power
rst.
Operations possible during playback
Adjusting the master volume
Press VOLUME df.
The volume level is displayed.
[Adjustable range]
VOLUME MIN, 1 - 59, MAX
Input source switching
Press [INPUT d] or <INPUT> to select the input source.
AUX1
iPod / USB
TUNERDISC
M-XPort
z1
AUX2
z1 “M-XPort” appears only when an RX101 wireless receiver is
connected to M-XPort.
Adjusting the tone
1
Use [TONE] to select the tone parameter to be adjusted.
BASS
BALANCE
TREBLE
2
Adjust the volume with 8, 9 or [o p].
To make other tone adjustments at this time, press [TONE].
If no operation is performed for 5 seconds, the adjustment is
retained and the normal display reappears.
BASS
Adjusts the bass sound.
[Variable range]
–10dB
+10dB
TREBLE
Adjusts the treble sound.
[Variable range]
–10dB
+10dB
BALANCE
Adjusts the left/right volume balance.
[Variable range]
+L06
CENTER
+R06
Settings made upon purchase:
• BASS ..................................... 0dB
• TREBLE ................................. 0dB
• BALANCE .......................CENTER
1.M-CR503NENG4th0610.indd131.M-CR503NENG4th0610.indd13 2010/06/1118:24:172010/06/1118:24:17

Table of Contents

Related product manuals