Marantz PM-10 - Repair Information; Troubleshooting; Special Mode

REPAIR INFORMATION
TROUBLE SHOOTING
1. The power cannot be turned on (STANDBY LED is not lit(STANDBY MODE))
2. The power cannot be turned on (STANDBY LED is lit→light ashes)
3. STANDBY LED ashes while using the unit (Protection circuit becomes activated)
4. The power turns on but no sound is output
MEASURING METHOD AND WAVEFORMS
ADJUSTMENT
Adjusting Idling Current
SPECIAL MODE
Special mode setting button
1. Service mode
2. ERROR MESSAGES
3. Protection operation
45
Caution in
servicing
Electrical Mechanical Repair Information Updating