16
ENGLISH
Basic operation
The PMD660 comes factory preset for recording voice
using its built-in (internal) microphone.
These are settings for recording a meeting, not settings for
recording a vocal performance.
1. Unpack the AC adapter and the PMD660.
a. Plug AC adapter into 100 - 240VAC power.
b. Plug the adapter jack into the PMD660 at DC IN.
2. Install a CF card.
See page 17 for installing a CF card.
Note: Outside of the USA, a CF card is not included.
3. Slide the POWER switch to turn on.
a. A full display will appear. Wait for the PMD660 to
initialize.
b. The display will change to this display for a newly
formatted CF card.
REMAIN
STEREO
MP3
I.MIC
LOCK
44.1K
001:05:32
000
To Next Page
Loading...
Need help?
General
