38
ENGLISH
Additional Functions
Battery
Battery setup
The PMD660 operates on 4 standard AA size Alkaline, or
Ni-MH batteries.
Setup the "Battery" of the preset menu.
(page 53)
Battery indicator
The Battery symbol appears in most displays to indicate
battery life.
indicates that the battery is fully charged.
indicates that the battery, is half charged.
Record or playback time is available.
indicates that the battery charge is getting
low. Battery charge is required as there is
little record or playback time available.
flashing indicates that the battery is very low!
• If Beep is set to On, the PMD660 will beep.
• If the PMD660 continues to operate, it will
automatically shut down.
• If recording, it will write track information,
stop recording and power off.
• If in playback, it will stop playback and
power off.
Auto power off
If the PMD660 is not operated for 15 minutes during stop
or play pause, power can be automatically shut off to
conserve battery life.
Setup the "AutoPowOff" of the preset menu. (page 53)
Beep Alarm
When battery charge can provide no more Power and Beep
is set to On, the battery indicator will flash and the PMD660
will beep and power off.
Setup the "Beep" of the preset menu. (page 54)
To Next Page
Loading...
Need help?
General
