49
ENGLISH
9. Auto Mark
The Auto Mark Menu item turns the automatic EDL mark
feature Off or On. See page 25 to manually add EDL marks.
• If Auto Mark is on and the machine is in record - pause,
when recording is resumed a mark will be added.
• If Auto Mark is on and the PMD660 is recording audio
below the sound threshold for more than three seconds,
audio that crosses the threshold will cause a mark to be
added.
The Auto Mark Menu setting permits :
• Turning Auto Mark On or Off
• Adjusting the margin sound level that defines silence in
-60dB, -54dB, -38dB, or -20dB.
1. From stop, push the MENU/STORE EDIT button.
2. Push the or button to select Preset1, 2 or 3.
3. Push the ENTER button to accept the selected Preset.
4. Push the or button so Auto Mark is displayed.
5. Push the ENTER button while Auto Mark is displayed.
The On or Off will be flashing.
6. Push the or button to toggle between On and Off.
7. When correct, push the ENTER button.
The display switches to sound level flashing.
8. Push the or button to change the margin of
sound level choices (-60dB, -54dB, -38dB or -20dB).
9. When correct, push the ENTER button.
Display returns to Auto Mark.
10. Push the or button to select other Menu
choices for editing. When editing the Preset is
complete, push the MENU/STORE EDIT button to
store the changes, or push the STOP/CANCEL button
to exit Menu mode without making any changes.
11. Display returns to stop mode.
Note:
The Auto Mark and Silent Skip features use the same
level setting.
As the level of Auto Mark is changed, that of Silent Skip
also changes automatically.
To Next Page
Loading...
Need help?
General
