Marantz SR3053 - Remote Controller Operation

NAMES AND
FUNCTIONS
14
BASIC
CONNECTIONS
BASIC
OPERATION
ADVANCED
CONNECTIONS
SETUP
ADVANCED
OPERATION
TROUBLESHOOTING
OTHERS
BASIC
OPERATION
REMOTE CONTROLLER OPERATION
To control the unit by your remote controller, you have to select the device AMP or TUNER by pressing the SOURCE button. Please refer below for the details in AMP and TUNER mode.
BASIC OPERATION
POWER ON Turns the SR3053 on
POWER OFF Turns the SR3053 off
SOURCE ON/OFF Turns the SR3053 on and off
AMP Selects AMP mode of remote unit
SOURCE Selects a particular source component
5.1 CH IN Selects the 5.1CH IN
MUTE Decreases the sound temporarily
VOLUME+/– Adjusts the over all sound level
A/D Switches between the analog or digital inputs
NIGHT Turns on or off NIGHT mode
SURROUND Selects the surround mode
AUTO Selects auto surround
STEREO Selects STEREO mode
S.DIRECT Selects the pure direct mode
Cursor Moves the cursor for setting in "SETUP MENU" mode
ENTER Confi rms the setting in "SETUP MENU" mode
MENU Enters the "SETUP MENU"
EXIT Exits from SETUP MENU
T.TONE Enters the test tone menu
TREBLE–/+ Adjusts the tone control of high frequency sound
BASS–/+ Adjusts the tone control of low frequency sound
DISPLAY Changes the front display mode
SLEEP Sets the sleep timer function
SIZE Calls up SPK SIZE adjust.
DISTANCE Calls up SPK DISTANCE adjust.
LEVEL
Calls up SPK CH LEVEL ADJUST and adjusts speaker
levels or 5.1ch input level
AMP AMP function enabled
SOURCE AMP function enabled
5.1 CH IN AMP function enabled
MUTE AMP function enabled
VOLUME+/– AMP function enabled
0-9 Inputs the numeric
A/D AMP function enabled
NIGHT AMP function enabled
SURROUND AMP function enabled
AUTO AMP function enabled
STEREO AMP function enabled
S.DIRECT AMP function enabled
TUNE 3 / 4 Tunes a frequency station up and down
PRESET + 2/– 1 Selects a preset station up and down
MENU AMP function enabled
EXIT AMP function enabled
T.TONE AMP function enabled
P.SCAN Starts preset scan
T.MODE Selects the auto stereo mode or mono mode
BAND Selects a radio band
TREBLE–/+ AMP function enabled
BASS–/+ AMP function enabled
DISPLAY AMP function enabled
SLEEP AMP function enabled
CLEAR Clears the inputting
MEMO Enters the tuner preset memory numbers
SIZE AMP function enabled
DISTANCE AMP function enabled
LEVEL AMP function enabled
AMP MODE TUNER MODE
SR3053S01ENG.indd14SR3053S01ENG.indd14 09.4.2111:46:53AM09.4.2111:46:53AM