ENGLISH
CAljJJQN
N..BA,lIERIES
Use "AAA" type batteries
in
this remote controller.
We
recommend that you use alkali batteries.
If
the remote controller does not operate from
close
to
the unit, replace the batteries with new
ones, even
if
less then a year has passed.
The included battery is only for verifying operation.
Replace it with a new battery as soon as possible.
When inserting the batteries, be careful
to
do so
in
the proper direction, following the + and - marks
in
the remote controller's battery compartment.
•
To
prevent damage or battery fluid leakage:
Do
not use a new battery with
an
old one.
Do
not use two different types of batteries.
Do not
short-circuit,
disassemble,
heat or
dispose of batteries
in
flames.
Remove the batteries when not planning
to
use the
remote controller for a long period of time.
If
the batteries should leak, carefully wipe off the
fluid from the inside of the battery compartment,
then insert new batteries.
When disposing of used batteries, please comply
with governmental regulations or environmental
public instruction's rules that apply
in
your country
or area.
1.
Remove the battery cover.
3.
Close the battery cover until
it
clicks shut.
2.
Load the two new size
"AM"
batteries inside
the battery compartment while taking care to
align their polarities correctly with the polarity
markings
(8:)
with
(8:)
and 8 with 8).
~8:)
8:)~
~
Before using the remote controller for the first time,
load the batteries
in
the remote controller. The
batteries provided are used to verify the operations
of the remote controller
only.
OPERATION
OF
REMOTE
CONTROLLER
REMQJ~.QONJB9~
Operate the remote controller within a distance of
approx. 5m from the infrared receptor window on the
front of the unit.
Caution:
•
Do
not allow direct sunlight, an inverter fluorescent
light or other strong source of light
to
shine onto
the player's infrared receptor window. Otherwise,
the operation
of
the remote controller may be
disabled.
Bear
in
mind that operating the remote controller
may cause other devices operated by infrared rays
to be operated by mistake.
The remote controller cannot be operated if the
space between the controller and the player's
infrared receptor window
is
obstructed.
Do not place any objects on top of the remote
controller.
Doing so may cause one or more buttons to be
held down which will cause the batteries to run
down.
3
To Next Page
Loading...
Need help?
General
