Marantz SR4023 User Manual

[]]I SLEEP button
This button is used for setting the sleep timer.
@I BASS up (A) Idown ( ... ) buttons
These buttons are used to adjust the tone control of
low frequency sound.
0J SOURCE DIRECT button
When this button is pressed, the audio signal will
bypass the tone control circuit to provide the pure
sound quality.
11]] TREBLE up (A) Idown ( ... ) buttons
These buttons are used to adjust the tone control of
high frequency sound.
[I] MEMO button
This button is used to store frequencies and station
names
in memory.
[IQ] Numeric buttons 0 to 9
These buttons are used to enter figures in the
selection of a tuner preset station and station name
preset or to set select a DVD chapter or title and a CD
track number, etc. The functions of these buttons are
dependent on the function button selected.
[j]] F.DIRECT button
(When TUNER mode is selected)
This button is used to select the "Frequency direct
input".
lID BAND button
(When TUNER mode is selected)
This button is used to select a radio band.
[]1] T.MODE button
(When TUNER mode is selected)
This button is used to select auto stereo mode or
mono mode when the FM band is selected.
The "AUTO" indicator lights
in the auto stereo mode.
[j]) P.SCAN button
(When tuner mode is selected)
This button is used to start preset scan.
lIZ] .... , ~, A, ... (CURSOR) buttons
These buttons are used when controlling the cursor
of the unit, DVD or other
AV equipment.
(When TUNER mode is selected)
PRESET
+/- buttons
This button is used to select a preset station up and
down.
TUNING +/- buttons
This button is used to tune a frequency station up
and down.
II§] CLEAR button
This button is used to cancel for certain memory or
programming operations.
!Hl PTY button
This button is not used for SR4023.
W MUTE button
Press this button decrease the sound temporarily.
Press this button again to return to the previous
sound level.
OJ POWER ON and OFF buttons
(When AMP mode is selected)
These buttons are used to turn the unit on or off.
W Input selector buttons 1FUNCTION
SELECTOR buttons
(AUDIO
1 VIDEO INPUT)
These buttons are used to select a Audio or Video
source component. When one of these buttons is
pressed, the input function of the unit
is changed.
Audio function sources such as PHONO, CD,
TUNER, RECORDER1 and RECORDER2 may be
selected
in conjunction with a Video source.
This feature (Sound Injection) combines a sound
from one source with a picture from another.
Choose the video source first, and then choose a
different audio source to activate this function.
[[] T.DISP button
This button is not used for SR4023.
[I] DIMMER button
When this button is pressed once, the display is
dimmed.
When this button is pressed twice, the
display is turned off and the "DISP" indicator lights
up.
Press this button again to turn on the display again.
[§] VOLUME +1- buttons
This button is used to adjust the volume for the
amplifier.
rn SOURCE POWER button
Press to switch the power of the source component
after pressing the function selector button.
rn SPKR AlB button
This button is used to select the speaker system.
The speaker system is switched in the following
sequence.
A+B
~A~ B ~A+B
3
6
8GB
see
see
rnapanlz.
RCOQ2$R
e+---rn
111 ... ------ ..... 111
Ci) CD CD
as a52511 10
[@-+S CD 8-i!l-illJ
f1i3 III ;SCAN PlY '0"'" TMOO; IlL ~
~8~GP8~
[1] .. [U]
REMOTE CONTROLLER
The provided remote controller is a system remote
controller. The POWER button, numeric buttons and
control buttons are used
in common across different
input source components.
The input source controlled with the remote controller
changes when one of the input selector buttons is
pressed.
6

Marantz SR4023 Specifications

General

Brand	Marantz
Model	SR4023
Category	Receiver
Language	English