ENGLISH
CONNECTING
THE
ANTENNA
TERMINALS
CONNECTING
THE
AC
POWER
CABLE
1.
Plug the supplied AC power cable to the AC
IN
socket on the rear panel of the main unit.
2. Plug the power cable into an AC outlet.
Connecting the supplied FM antenna
The supplied
FM
antenna is for indoor use only.
During use, extend the antenna and move
it
in various
directions until the clearest signal is received.
Fix it with push pins or similar implements in the
position that will cause the least amount of distortion.
If
you experience poor reception quality, an outdoor
antenna may improve the quality.
Connecting the supplied
AM
loop antenna
The supplied AM loop antenna is for indoor use
only.
Set
it
in the direction and position
it
to where you
receive the clearest sound. Put it as far away as
possible from the unit, televisions, speaker cables,
and power cords.
If you experience poor reception quality,
an
outdoor
antenna may improve the quality.
1.
Press
and
hold down the lever of the
AM
antenna
terminal.
2. Insert the bare wire into the antenna terminal.
3.
Release the lever.
tr1
I
AM
External
Antenna
AM Loop
Antenna
FM
External
Antenna
FM
Antenna
,
lli
U~
,--
:.
r
1
r
1
c
~,MablNG
THE
AM
becp
ANTENNA
1.
Release
the
vinyl
tie
and take out the connection
line.
2. Bend the base part
in
the reverse direction.
3.
Insert the hook at the bottom of the loop part
into the slot at the base part.
4. Place the antenna
on
stable surface.
Notes:
• Keep the antenna away from noise sources (neon
signs, busy roads, etc.).
• Do not put the antenna close to power lines. Keep
it
well away from power lines, transformers, etc.
•
To
avoid the risk
of
lightning and electrical shock,
grounding
is
necessary.
CONNECTING
AN
AM
OYTQgOR
ANTENNA
An outdoor antenna will be more effective if it is
stretched horizontally above a window or outside.
Notes:
• Do not remove the AM loop antenna.
• To avoid the risk
of
lightning and electrical shock,
grounding
is
necessary.
To Next Page
Loading...
