Marantz SR6005 User Manual

6
ENGLISH DEUTSCH FRANÇAIS ITALIANO ESPAÑOL NEDERLANDS SVENSKA
Blu-ray Disc player and TV
Use only an HDMI (High Definition Multimedia Interface) cable that bears the HDMI
logo (a genuine HDMI product). Using a cable without the HDMI logo (a non-genuine
HDMI product) may result in abnormal playback.
When outputting Deep Color or 1080p, etc., we recommend you use a “High Speed
HDMI cable” or a “High Speed HDMI cable with Ethernet”for enhanced high-quality
playback.
IN
HDMI
OUT
HDMI
To household power outlet
(AC 230 V, 50 Hz)
Power cord
(supplied)
HDMI cable
(sold separately)
HDMI cable
(sold separately)
Blu-ray Disc player
TV
NOTE
• Do not plug in the power cord until all connections have been completed.
• Do not bundle power cords together with connection cables. Doing so can result in humming or noise.
Connect
The “Simple version” section provides the speaker installation, connection, and setup methods for the 7.1-channel system with surround back speakers.
For the installing, connecting, and setup methods of speakers other than the 7.1-channel system (with surround back speakers), see page 35.
FL FR
C
SL
SR
SW
SBL SBR
Speaker cables
(sold separately)
Audio cable
(sold separately)
Subwoofer with
built-in amplifier

Marantz SR6005 Specifications

General

Channels	7.1
Power Output	110W per channel (8 ohms, 20Hz-20kHz, 0.08% THD)
HDMI Inputs	6
HDMI Outputs	1
Dolby Technologies	Dolby TrueHD, Dolby Digital Plus, Dolby Pro Logic IIz
Networking	No
3D Support	Yes
Audio Return Channel (ARC)	Yes
Phono Input	Yes
Total Harmonic Distortion	0.08%
Signal-to-Noise Ratio	100 dB
Input Sensitivity	200 mV
USB Port	Yes
DTS Technologies	DTS-HD Master Audio, DTS Neo:6
Multi-room	Yes
Frequency Response	10Hz-100kHz
Video Upconversion	Yes