Marantz SR6005 User Manual

19
Simple version Advanced version Information
ENGLISHDEUTSCHFRANÇAISITALIANOESPAÑOLNEDERLANDSSVENSKA
Basic version
Connecting a digital camcorder
• You can enjoy video and audio from a digital camcorder.
• You can enjoy games by connecting a game machine via the AUX1
input connector. In this case, select the input source to “AUX1”.
• For instructions on HDMI connections, see “Connecting an HDMI-
compatible device” (vpage15).
Cables used for connections
Video cable (sold separately)
Video cable
(Yellow)
Audio cable (sold separately)
Audio cable
(White)
(Red)
R
L
R
L
Optical cable
R
L
R
L
OUT
VIDEO
VIDEO
RL
AUDIO
OUT
OPTICAL
OUT
AUDIO
Digital camcorder
Set this to change the digital input connector to which the input
source is assigned.
“Input Assign” (vpage52)
in Set as Necessary
The front panel OPTICAL input terminal is displayed as “OPT3” in the
“Input Setup” – “Input Assign” setting (vpage52) in the menu.
NOTE
When a non-standard video signal from a game machine or some other
source is input, the video conversion function might not operate. In
this case, use the monitor output of the same connector as the input.
Supported iPod models
Made for
• iPod touch (2nd generation)
• iPod touch (1st generation)
• iPod classic
• iPod with video
• iPod nano (5th generation)
• iPod nano (4th generation)
• iPod nano (3rd generation)
• iPod nano (2nd generation)
• iPod nano (1st generation)
• iPhone
• iPhone 3G
• iPhone 3GS
Connecting an iPod or USB memory device to the USB port
You can enjoy music stored on an iPod or USB memory device.
Cables used for connections
To connect an iPod to this unit, use the USB cable supplied with the
iPod.
USB
memory
device
iPod
or
Marantz does not guarantee that all USB memory devices will operate
or receive power. When using a portable USB connection type HDD
of the kind to which an AC adapter can be connected to supply power,
use the AC adapter.
NOTE
• USB memory devices will not work via a USB hub.
• Do not use an extension cable when connecting a USB memory
device. This may cause radio interference with other devices.

Marantz SR6005 Specifications

General

Channels	7.1
Power Output	110W per channel (8 ohms, 20Hz-20kHz, 0.08% THD)
HDMI Inputs	6
HDMI Outputs	1
Dolby Technologies	Dolby TrueHD, Dolby Digital Plus, Dolby Pro Logic IIz
Networking	No
3D Support	Yes
Audio Return Channel (ARC)	Yes
Phono Input	Yes
Total Harmonic Distortion	0.08%
Signal-to-Noise Ratio	100 dB
Input Sensitivity	200 mV
USB Port	Yes
DTS Technologies	DTS-HD Master Audio, DTS Neo:6
Multi-room	Yes
Frequency Response	10Hz-100kHz
Video Upconversion	Yes