12
ENGLISH
7
RDS (Radio Data System)
• RDS (works only on the FM band) is a broadcasting
service which allows station to send additional information
along with the regular radio program signal.
• The following three types of RDS information can be
received on this unit:
• Program Type (PTY)
• PTY identifies the type of RDS program.
• The program types and their displays are as follows:
• Traffic Program (TP)
•
TP identifies programs that carry traffic announcements.
• This allows you to easily find out the latest traffic
conditions in your area before you leaving home.
• Radio Text (RT)
• RT allows the RDS station to send text messages that
appear on the display.
Note
• The operations described below pressing the DISPLAY
button t or . will not function in areas in which there are
no RDS broadcasts.
News
Current
Affairs
Information
Sports
Education
Drama
Culture
Science
NEWS
AFFAIRS
INFO
SPORT
EDUCATE
DRAMA
CULTURE
SCIENCE
Varied
Pop Music
Rock Music
Easy
Listening
Music
VARIED
POP M
ROCK M
EASY M
Light
Classical
Serious
Classical
LIGHT M
CLASSICS
Weather
WEATHER
Finance
Children’s
Programs
Social Affairs
Religion
Phone In
Travel
FINANCE
CHILDREN
SOCIAL
RELIGION
PHONE IN
TRAVEL
Leisure
Jazz Music
LEISURE
JAZZ
Country Music
COUNTRY
National Music
Oldies Music
Folk Music
Documentary
NATION M
OLDIES
FOLK M
DOCUMENT
Other Music
OTHER M
7
Recalling preset stations (FM/AM)
1. Press the POWER ON/STANDBY switch q or ON
button , to turn on the power.
2. Watching the display, press the BAND button c to
select the desired band (AM or FM).
3. Press the MENU button u or ⁄2 to select menu.
4. Press the TUNING/PRESET knob !4 or ENTER button
v to set search mode.
5.
Either turn the TUNING/PRESET knob !4 or
press the
CHANNEL/CONTROL button ⁄4 to select “Preset”.
6. Press the TUNING/PRESET knob !4 or ENTER v
button and set the preset mode.
7
-1
.Watching the display, turn the TUNING/ PRESET knob
!4, or press the CHANNEL/CONTROL button ⁄4 to
select the desired preset channel.
7
-2
.Press the SHIFT button ⁄3 and select the desired
memory group (A to J) or press the MEMORY GROUP
(A to J) button n.
7
-3
.Press the Preset channel button x to select the desired
preset channel (1 to 10).
Note
• Steps 2 to 6 can be skipped when using the
CHANNEL/CONTROL ⁄4, SHIFT ⁄3, MEMORY GROUP
(A to J) n and Preset channel x buttons.
The preset mode is set when any of these buttons is
pressed, regardless of the menu setting at that time.
OPERATION
To Next Page
Loading...
