Need help?Do you have a question about the Markes International Unity 2 and is the answer not in the manual?
General| Brand | Markes International |
|---|---|
| Model | Unity 2 |
| Category | Laboratory Equipment |
| Language | English |
Crucial safety notices for instrument installation and operation.
Explains hazard symbols and warnings for safe operation.
Guidelines for mains voltage connection, earthing, and internal voltages.
Warnings about hot surfaces and zones to prevent burns.
Safety precautions when using flammable hydrogen as a carrier gas.
Contact details for Markes International technical support.
Outlines the standard sequence of operations for sample analysis.
Detailed explanation of the automated leak testing procedure.
The first stage of desorption from the sample tube.
The second stage of desorption from the cold trap.
Procedures for inserting and removing sample tubes from the instrument.
Managing gas flows for desorption and splitting operations.
How to use the software function for setting gas flows.
Instructions for using flow meters to set gas flows.
Steps to start the software and establish instrument communication.
How to set and use Trap Heat parameters.
Configuration settings for the UNITY 2 software.
Detailed explanation of the leak testing process.
Schedule of recommended maintenance tasks and their frequencies.
Safety precautions and steps for removing/replacing a cold trap.
Detailed procedure for removing and replacing a broken cold trap.
To Next Page
