The JUPITER series balcony photovoltaic integrated machine has two working modes:
In addition, in any mode, when the battery is fully charged, the device will automatically transmit excess energy
generated by photovoltaics to the grid.
2.5 Working Mode
Automatic
mode
Manual
Mode
In this mode, the device will automatically search for CT devices connected to the same home
network, and output grid-connected power in real time to compensate for home load losses based
on the home electricity consumption information collected by the CT device.
In this mode, the device performs fixed grid-connected power output during the time period set by
the user; if a time period is not set, no grid-connected output will be performed.
10
To Next Page
Loading...
