Stop Debugging
4.
The storage temperature of the balcony photovoltaic integrated machine is -30°C to 80°C.
To facilitate transportation and subsequent handling, MARSTEK packaging is specially designed
to protect the components. When transporting equipment, especially by road, it is necessary to
Correct methods must be adopted to protect components (especially electronic devices) to
prevent them from being affected by severe impact, moisture, vibration and other factors.
Please check the condition of the parts to be shipped. After receiving the machine, check the
packaging for damage and confirm that all items have been received. If there is any damage to
the appearance or parts are missing, please call the carrier immediately. If the parts of the
balcony photovoltaic integrated machine are damaged, please contact the supplier or authorized
dealer to apply for repair/replacement and consult the relevant procedures.
Please dispose of the packaging materials properly to avoid accidental personal injury.
4.1 Stop debugging
4.2 Storage And Shipping
If the device will not be used immediately or needs to be stored for a long time, please make
sure the packaging is intact.
When storing the balcony photovoltaic integrated machine for a long time, the equipment must
be stored in a well-ventilated indoor area that will not cause damage to the equipment
components.
When restarting equipment that has been out of service for a long time, a comprehensive
inspection of the equipment is required.
Randomly discarding the scrapped balcony photovoltaic integrated machine may harm the
environment. Please properly dispose of the scrapped balcony photovoltaic integrated machine
in accordance with local regulations.
4.3 Disposal
Disconnect all photovoltaic inputs and AC grid-connected connections of the balcony photovoltaic
integrated machine, remove all connecting cables from the balcony photovoltaic integrated
machine, and put the balcony photovoltaic integrated machine into its original packaging.
15
To Next Page
Loading...
