Safety Precautions
1.
The Company shall not be liable for any of the following circumstances or their
consequences:
Equipment damage caused by earthquake, flood, volcanic eruption, mudslide, lightning strike, fire, war,
armed conflict, typhoon, hurricane, tornado, extreme weather, or force majeure.
Not operated within the conditions of use described in this manual.
The installation and use environment does not comply with relevant international, national or regional
standards.
Unqualified personnel installing and using the equipment.
Failure to follow the operating instructions and safety warnings in the product and documentation.
Unauthorized disassembly, modification of the product or modification of the software code.
Damage caused by transportation by you or a third party you entrust.
Damage caused by storage conditions not meeting the requirements of product documentation.
The materials and tools you bring with you do not meet the requirements of local laws, regulations and
relevant standards.
Damage caused by your or a third party's negligence, intent, gross negligence, improper operation or
reasons not attributable to the Company.
1.1 Personal Safety
It is strictly forbidden to operate with power on during the installation process. It is forbidden to
install or remove cables with power on. When the cable core contacts the conductor, arcs or
sparks will be generated, which may cause fire or personal injury.
When the equipment is energized, irregular or incorrect operation may cause fire, electric shock
or explosion, resulting in personal injury or property loss.
During operation, it is strictly forbidden to wear watches, bracelets, rings, necklaces and other
conductive objects to avoid electric shock and burns.
It is prohibited to reverse engineer, decompile, disassemble, adapt, implant or other derivative
operations on the device software, study the internal implementation logic of the device, obtain
the source code of the device software, infringe intellectual property rights in any way, and
disclose the results of any device software performance test.
All operations such as transportation, storage, installation, operation, use and maintenance must
comply with applicable laws, regulations, standards and specifications.
This equipment should be used in an environment that meets the design specifications.
Otherwise, the possible equipment failure, equipment malfunction or component damage is not
within the scope of the equipment quality assurance. Otherwise, the company will not be liable
for compensation for personal injury, property loss, etc.
This product is for outdoor (balcony) use.
The JUPITER series balcony photovoltaic integrated machine has been designed and tested
according to international safety requirements. However, safety regulations must still be
followed when installing and operating this series of balcony photovoltaic integrated machines.
Installers must carefully read, fully understand and strictly comply with all instructions,
precautions and warnings in this installation manual.
4
To Next Page
Loading...
