Special insulating tools must be used during the operation to avoid electric shock or short circuit
failure. The insulation withstand voltage level must meet the requirements of local laws,
regulations, standards and specifications.
Special protective equipment must be used during the operation, such as protective clothing,
insulating shoes, goggles, safety helmets, insulating gloves, etc.
1.2 Electrical safety
Do not ignore warnings, cautions, and precautions in the manual and on the equipment.
During equipment operation, if any fault is found that may cause personal injury or equipment
damage, the operation should be stopped immediately, reported to the person in charge and
effective protective measures should be taken.
Do not power on the device before the installation is completed or the device has not been
confirmed by a professional.
When the device is running, the casing temperature is high and there is a risk of burns, so do not
touch it.
If a fire occurs, evacuate the building or equipment area immediately and press the fire alarm, or
call the fire alarm. Under no circumstances is it allowed to re-enter the burning building or
equipment area.
It is prohibited to directly touch, use other conductors to touch, or indirectly touch the power
supply equipment through wet objects. Before touching any conductor surface or terminal,
measure the voltage at the contact point to confirm that there is no risk of electric shock.
Personnel who operate the equipment include professionals and trained personnel.
Personnel responsible for installing and maintaining the equipment must first undergo rigorous
training, master the correct operating methods, and understand various safety precautions and
relevant standards of the country/region where they are located.
Only qualified professionals or trained personnel are allowed to install, operate and maintain the
equipment.
Personnel involved in special scenarios such as electrical operations, high-altitude operations,
andspecial equipment operations must have special operation qualifications required by the local
country/region.
Only qualified professionals are allowed to remove safety features and repair equipment.
General requirements
Personnel Requirements
Before installation, please check the equipment to make sure that it has not been damaged
during transportation. If damaged, the insulation integrity or safety of the equipment may be
affected. Please carefully select the installation site and comply with the specified cooling
requirements. Unauthorized removal of necessary protective equipment, improper use, improper
installation, and improper operation may cause damage to the equipment or even cause serious
safety accidents and electric shock.
Before connecting the balcony photovoltaic integrated machine to the grid, please contact the
local grid operator for approval. All connection operations stated in this manual must be
completed by professional technicians who have received relevant training.
5
To Next Page
Loading...