18 MAC 2000 Profile
7 Focus calibration is useful when two or more fixtures are the same distance from a projection surface. To
calibrate focus, set up all fixtures with the same focus, zoom, dimming, iris, and gobo values. Select a
focussed fixture to be the reference. On the other fixtures, select
UTIL/CAL/FOOF and press [Enter].
Adjust the offset to focus the image. Press [Enter] to save the setting.
Software upload
The software update mode is normally engaged automatically by the upload device. See Software installation on
page 25.
To Next Page
Loading...
Need help?
General
