USE AND MAINTENANCE
ENGLISH
Cod. F07022163
pag.1
Pre-delivery inspection
The following inspections, adjustments and interventions were performed before machine’s delivery:
□ All grease fittings lubricated.
□ Gearbox oil level checked and topped up (as necessary).
□ Tyre inflation checked and adjusted.
□ All screws and nuts tightened.
□ Grease removed from the mesh cutter.
□ Monitor battery cable properly connected.
□ Testing cycle performed.
□ Hatch opened and closed freely.
□ Pre-cutting device properly operating.
□ Monitor properly operating.
□ Switches and sensors properly adjusted.
□ Absence of leaks from hydraulic hose or respective connections verified.
□ Proper chain tension and lubrication verified.
□ Paint and stickers smooth and clean.
□ Delivery of operator's manual to customer.
□ Delivery of other documentation (CE – road approval where required).
□ The operator is aware of the safety precautions to be followed with the machine.
□ Remove the packaging used for delivery / shipment from the round baler, taking care not to damage the
machine.
Date:
Signature of the dealer or his technician:
To Next Page
Loading...
