Maschio TERMINATOR - Danger and Indicator Signals

Code F07011709
g.2
12
2
1
6
5
13
MASCHIO GASPARDO INDIA PVT. LTD.
Plot No. F27, MIDC, Ranjangaon, Village Karegaon, Tal Shirur, Dist. Pune 412220 India
Ph.:+91 2138 621500. Email : info@maschio.in Website : www.maschio.com
PRODUCT
MODEL
TYPE
SERIAL
NUMBER
H.P.
REQ.
YEAR OF MANUFACTURE
F20200163 Made in India
WEIGHT
kg
13
7
12
18
10
11
7
4
19
9
14
21
15
20
22
21
16
8
USE AND MAINTENANCE
ENGLISH
11
scribed. Never exchange the 540 rpm rate for 1000 rpm.
9) Danger of possible shearing of upper limbs. Keep a safe di-
stance from the machine while it is working.
10) Danger of possible shearing of lower limbs. Keep a safe di-
stance from the machine.
11) Danger of being crushed. Do not get rear the machine.
12) Danger of injury to the hands. Never remove the guards while
the parts are mowing. Wait until all moving components have
completely stopped.
13) Danger of possible ying blunt objects.
Keep a safe distance from the machine.
14) Do not use the implement with open bonnet. Open it only in
case of maintenance on the machine, when the engine is off
and the tractor braked.
15) Danger: the bonnet could drop. Take care when in the vicinity.
16) Danger of burns. Do not touch these parts during or after use.
2.1.3 INDICATOR SIGNALS
17) Wear safety clothing.
18) Signs the hooking points for lifting.
19) Greasing point.
20) Oil ll plug.
21) Oil drain plug.
22) Oil level plug.
2.0 GENERAL SAFETY RULES
2.1 DANGER AND INDICATOR SIGNALS
The signs described are reproduced on the machine (g.2). Keep
them clean and replace them if they should come off or become
illegible. Carefully read each description and learn their meanings
by heart.
2.1.1 WARNING SIGNALS
1) Before operating, carefully read the instruction booklet.
2) Before carrying out maintenance, stop the machine and consult
the instruction booklet.
2.1.2 DANGER SIGNALS
3) Risk of inhaling harmful sub- stances. Wear a dust mask & Ear
plug
4) Danger of falling. Do not get up on the machine
while it is moving.
5) Danger of getting hooked by the Cardan shaft. Keep away
from moving parts.
6) Danger of being crushed. Do not get between the tractor and
the machine.
7) Danger of possible shearing of lower limbs. Keep a safe di-
stance from the machine.
8) Before engaging the pto, check that the rpm rate is that pre-
The Manufacturer declines any and all responsibility in the event that the safety pictograms supplied with
the machine are missing, illegible or moved from their original position.
173