Maschio TERMINATOR - Machine Handling and Safety

Code F07011709
g.7
B
A
C
C
B
A
TERMINATOR
HYDRAULIC
USE AND MAINTENANCE
ENGLISH
18
3.3 HANDLING
ATTENTION
The Customer must apply the rules envisaged in the
European Directives EEC 391/89 and 269/90 and subse-
quent modications on the possible risks for loading
and unloading operators caused by manual handling
of loads.
During handling operations wear suitable personal
protection equipment:
Overalls Gloves Shoes Hardhat
If the machine has to be handled, it should be lifted by
hooking cloth ropes to the attachment points provided and
using a suitable hoist or crane with sufcient capacity (g.7).
Because of the danger involved, this operation should be
carried out by trained and responsible personnel. The mass
of the machine is on the identication Plate (Fig. 1). Stretch
the rope to keep the machine level.
The hook points can be detected by nding the “hook”
symbol (g.16). Hook up at points: A-B-C for TERMINATOR
HYD models.
ATTENTION
• Packaging materials (pallets, cartons, etc.) must be
disposed of as prescribed by the existing regulations
through authorised disposal companies.
• Parts making up the machine must not be lifted by
hooking them up from moving or weak parts such as
guards, electrical runways, pneumatic parts, etc.
• Standing under suspended loads is not allowed; unau-
thorised personnel are not allowed access to the work
sites; it is mandatory to wear overalls, safety footwear,
gloves and a hardhat.