IS 6.1
- 18
GB
GB
2.3 TECHNICAL CHARACTERISTICS TABLE
(1)
Limited - time running power (LTP) ISO 8528-1
It is the maximum power that, under the environment conditions established by the norm ISO 3046/1, the generator group it is able to disburse for
a maximum of 500 hours for year, of which a maximum of 300 hours among the interval of maintenance prescribed by the builder. It is accepted
the operation to this power conditions the duration of the group.
An overload of the 10% is admitted only for regulation.
(2)
Prime power (PRP) ISO 8528-1
It is the available maximum power for a variable power cycle that the generator group is able to disburse for a boundless number of hours for year
among the interval of maintenance prescribed by the builder and under the environment conditions established by the norm ISO 3046/1. The middle
power during a period of 24 hours, doesn't have to exceed 80% of the PRP.
An overload of the 10% is admitted only for regulation.
MAX POWER (LTP)
6.1 kW
CONTINUOUS POWER (PRP)
5.6 kW
MAX TILT OF USE
(PERIODICAL 3 min)
30°
MAX TILT OF USE (CONTINUOUS)
25°
L/min - gal/min
DISPLACEMENT
479 - 29,2 cm3 - in3
FULL LOAD CONSUMPTION
2,6 - 0,7 L/h - gal/h
WATER / WATER (INTERCOOLER W/A)
LUBRIFICATION SYSTEM FORCED
OIL SUMP CAPACITY 2,1 - 0,5
L - gal
(negative pole to ground)
STARTING MOTOR 12 - 0,7 V - kW
STARTING BATTERY 12 - 45 V - Ah
BATTERY CHARGER 12 - 10
V - A
SYNCHRONOUS, SELF-REGULATED
A
A
MODEL
IS 6.1
ALTERNATOR