Mase Generators IS 6.1 - Period Checks and Maintenance

IS 6.1
- 41
GB
GB
6.18 PERIOD CHECKS AND MAINTENANCE
Perform service at intervals indicated
Before
starting
Every 50
hrs.or 1
Month
Every 100
hrs.or 2
Month
Every 200
hrs.or 3
Month
Every 400
hrs.or
Yearly
Every 500
hrs.
Every 800
hrs.
Fuel system
Check the fuel level and refill
○
Remove sediment from fuel tank
○
Clean fuel filter
○
Replace the fuel filter element
○
Check the fuel injection nozzle
●
Check the fuel injection timing
●
Check the fuel injection pump
●
Lubrification system
Check the oil level
○
(Before
operation)
○
10
h
Replace the oil
○
1
st
time
○
Replace the oil filter element
○
1
st
time
○
Cooling system
Inspect exhaust system components
for cracks and corrosion (exhaust line,
hose clamps, silencer and outlet flapper)
○
Check function of siphon break
(if equipped)
○
Replace seawater pump impeller
○
Check condition of heat exchanger
anticorrosion zinc
○
Check thermostat function
●
Flush cooling system
●
Intake / Exhaust system
Check the air cleaner element
○
Replace air cleaner element
○
Check the air intake pipe
○
Check exhaust system
○
(thereafter)
Clean exhaust/water mixing elbow
○
Electrical system
Check and tighten electrical connections
○
Clean battery cables
○
Check the electrolyte level in the battery
○
Engine and mounting
Check for leakage af water and oil
○
○
(thereafter)
Retighten all major nuts and bolts
○
Check tightness of mounting bolts/
vibromounts
●
Check the belt-tension
○
Replace belt
○
Check and adjusting intake / exhaust
valve clearance
● ○
Remote control system, etc.
Check remote control operation
○
○
(thereafter)
Test run generator set
○
PERIOD CHECKS AND MAINTENANCE
●
In presence of this symbol it is obligatory to effect the technical support in an our authorized retailer / workshop.
○ In presence of this symbol it is possible to effect the technical support autonomously .