Mase Generators IS 6.1 User Manual

IS 6.1
- 28
GB
GB
GRDL0L1
60 Hz
120V
230V
50Hz
N
L1
N
The control panel must necessarily be installedas it
isessential forgenerator operation.
Donotusedevices differentfrom thecontrol provided
with the generator, since they may be
incompatible withthe generator.
Make the connection with thebattery detached.
The control panel is supplied with a 10 m long
connection cable.
Do not modify this cable as it may cause improper
functioning of the panel circuit.
3.7.3 A.C. CONNECTION
This connection can be made by means of the power
terminal board.
Generator earthing.
High voltage may cause serious injury or death.
Electroconduction is possible whenever electricity is
present.
De-energise the main magnetothermal switches
of all the power outputs before repairing the equipment.
Configure the installation for earthing of the generator
and the electrical circuits when in use.
Avoid contact with the electrical conductors or equipment
when standing in water or on wet ground, since there is
a higher risk of electroconduction in these conditions.
Short-circuits. High voltage may cause serious
injury or death.
Short-circuits may cause physical injury and/or damage
to the equipment. Avoid contact with the electrical
connectors through tools or jewellery. Take off wrist
watches, rings or any other jewellery before working on
the electrical circuits.

Mase Generators IS 6.1 Specifications

General

Brand	Mase Generators
Model	IS 6.1
Category	Portable Generator
Language	English