EasyManua.ls Logo

Mase IS 24 - 6.21 Period Checks and Maintenance

Mase IS 24
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
IS 24 - 27 - 25T - 30T - 34T
- 41
GB
GB
6.21 PERIOD CHECKS AND MAINTENANCE
Perform service at intervals indicated
Before
starting
Every 50
hrs.or 1
Month
Every 200
hrs.or 3
Month
Every 400
hrs.or 6
Month
Every 500
hrs.or Yearly
Every 1000
hrs.or Yearly
Every 2000
hrs.or Yearl
y
Fuel system
Check the fuel level and refill
○
Remove sediment from fuel tank
○
Water/fuel separator drainage
○
Clean the water/fuel separator
○
Replace the fuel filter element
○
Check the fuel injection nozzle
○
Check the fuel injection timing
●
Check the fuel injection pump
●
Lubrification system
Check the oil level
○
(Before
operation)
Replace the oil
○
1
st
time
○
(and
thereafter)
Replace the oil filter element
○
1
st
time
○
(and
thereafter)
Cooling system
Check and eventually add the liquid cooling
○
Replace the the liquid cooling
○
Inspect exhaust system components
for cracks and corrosion (exhaust line, hose
clamps, silencer and outlet flapper)
○
Check function of siphon break
(if equipped)
○○
Adjust seawater pump belt tension
○
1
st
time
○
(and
thereafter)
Replace seawater pump impeller
○
Check condition of heat exchanger
anticorrosion zinc
○○
Check thermostat function
●
Flush cooling system
●
Adjust the tension of closed cooling system
pump belt
○
1
st
time
○
(and
thereafter)
Intake / Exhaust system
Check the air cleaner element
○
Replace air cleaner element
○
Check exhaust system
○
(and
thereafter)
Clean exhaust/water mixing elbow
○
Electrical system
Check and tighten electrical connections
○
Clean battery cables
○
Check the electrolyte level in the battery
○
Engine and mounting
Check for leakage af water and oil
○
○
(and
thereafter)
Retighten all major nuts and bolts
○○
Check tightness of mounting bolts/
vibromounts
●
Check and adjusting intake / exhaust
valve clearance
●
Check and adjust the injection fuel pump
●
Remote control system, etc.
Check remote control operation
○
○
(and
thereafter)
Test run generator set
○
○
In presence of this symbol it is possible to effect the technical support autonomously .
●
In presence of this symbol it is obligatory to effect the technical support in an our retailer /workshop authorized by MASE.

Table of Contents