What to do if Radical-7 is not docked before Pathway operation in Masimo Medical Equipment?
When using Masimo Medical Equipment, dock a Radical-7 device to Root prior to performing the Pathway operation.
What to do if Masimo Measuring Instruments Root does not turn on?
If your Masimo Root device doesn't turn on, make sure you press the power button for at least two seconds. Also, the battery might be depleted, so connect Root to AC power to charge it. If the issue persists, one of the fuses might not be working correctly and should be replaced.
Why is my Masimo Measuring Instruments not displaying data from Radical-7, Radius-7, or MOC-9 modules?
If your Masimo Root isn't displaying data from Radical-7, Radius-7, or MOC-9 modules, it may be due to a connection error. Check that all connections are secure and properly plugged in, and that the cable is not defective. For Radius-7, ensure that the device is paired with Root via Bluetooth.
What to do if the Power Button does not respond when pressed on Masimo Measuring Instruments?
If the power button on your Masimo Root isn't responding, try pressing and holding it for two seconds to power on from a turned-off or sleep state. To power off from an on or sleep state, press and hold the power button for eight seconds.
What to do if Masimo Measuring Instruments Root turns on, but Main Screen is dim or blank?
If your Masimo Root turns on but the main screen is dim or blank, try adjusting the brightness setting.
General| Category | Medical Equipment |
|---|---|
| Display | 10.1 inch touchscreen |
| Connectivity | WiFi, Bluetooth |
| Power Supply | AC power |
| Dimensions | 26.8 cm x 22.4 cm x 5.1 cm |
| Ports | USB, Ethernet |
| Supported Parameters | SpO2, Pulse Rate |
| Compatibility | Masimo sensors |
| Model | Root |
To Next Page
