MASTER KITCHEN Prime Series - Easy Control Panel Advanced Operations

EN-18
When the oven is running, you can pause it by pressing the stop key . Then,
you can resume normal operation according to the functions previously selected,
by pressing the start key
. Pressing twice the stop key will erase the current
cooking settings and the oven will enter standby mode.
During normal operation, you can see the current time (if already set) by pressing
the
key. After 3 seconds, the display will show again current cooking function,
temperature and time.
Setting Cooking Time
You can set the preferred cooking time, so that the oven will automatically power off
once this time is elapsed. After setting the preferred function and/or temperature and
pressing the power on key
, the display will show 9 hours as default cooking time.
This setting can be modified with the following steps:
1 - When the oven is running, turn the left "K1" knob to set the cooking time (between
1minute and 9 hours).
2 - Press enter key to confirm
. The oven will start a count down and after its
expiration the oven beeps and turn off automatically.
N.B. If, after setting the cooking duration, you don't press the enter key
within
3seconds, the oven will automatically switch to the previously set cooking duration.
Turn on Oven Light
The light inside the cooking cavity is always turned on for all the cooking and
defrosting functions (except the ECO function). You can always turn on the light inside
the oven using the related function and use it for example when you are cleaning the
appliance.
Turn the left knob "K1", select the function Light
and press the enter key : the
light will turn on inside the oven cavity. To turn off the light and switch to standby
mode, press twice the stop key
.
Setting Timer function
The oven Timer function is a common kitchen timer and can be used only when the
oven is in standby mode.
1 - When the oven is in standby mode, press
key to access the Timer function.
2 - Turn the right knob "K2" to setup hours (value between 0 and 9).
3 - Press enter key
to confirm.
4 - Turn the right knob "K2" to setup minutes (value between 0 and 59).
5 - Press start key
to confirm and complete Timer settings. The oven count down
will start and after its expiration the oven buzzer will beep 10 times.
During the count down, the Timer can be paused by pressing once the stop key
,
while pressing once the start key
resumes again the count down. To clear the Timer
function and switch to standby mode, press twice the stop key
.
During the count down, you can see the current time (if already set) by pressing the
key. After 3 seconds, the display will show again the timer count down.