EN-26
LAMP REPLACEMENT
If the lamp on the rear wall of the oven compartment lightens up, it must be replaced.
Heat resistant halogen lamps are available from the Service Centre or specialist retailers
(250 V~, 25 W, G9, T 300°C).
When handling the halogen lamp, use a dry piece. It will increase the lamp's life cycle.
WARNING
Electric Shock Hazard!
When replacing the lamp, the connector contacts are live. Before replacing the lamp,
remove the power outlet from the appliance or disconnect the jump switch from the
meter.
Risk of burns!
The appliance becomes very hot during operation. Never touch the inside surfaces of
the appliance or the heating elements when it is still hot. Always let the appliance cool.
Keep children at a safe distance.
1. Place a cloth on the bottom of the oven, which must be cold, to prevent damage.
2. Turn the glass cover counterclockwise to remove it.
3. Remove the lamp. WARNING, pull the LAMP DO NOT rotate it.
4. Insert the new lamp, making sure that the pins are in the correct position.
5. Refit the glass cover.
6. Remove the cloth from the bottom of the cavity, reconnect the power supply and
select LIGHT function to see if the lamp turns on.
Glass cover
If the glass cover of the halogen lamp is damaged, it must be replaced.
You can find the glass cover at the service desk. Please specify the model and serial
number of your appliance.
To Next Page
Loading...