Gauges & Video Screens • 2014 MasterCraft Owners Manual Page 3-49
G A U G E S & V I D E O S C R E E N S
Utilities
System Information
The System Settings screen displays the
current software version loaded on the unit.
It is typically only accessed when the unit
is rst installed in order to congure the
unit. You can set individual settings for
the available options, or choose to select
[RESTORE DEFAULTS] for the factory
settings.
Ballast Settings
Use the [NEXT] and [PREVIOUS] soft
keys to navigate the settings. Use the Save
soft key to save the modied settings.
Troubleshooting
Issue:
Display appears to not work or
doesn’t come ON.
Possible Remedies:
• Display could be in SLEEP mode. Touch
a key on the keypad to activate the dis-
play.
• Check for loose connections at battery
and display unit.
• Check for reversed polarity on the pow-
er connections, if connected to shore
power.
• Verify battery has a minimum voltage of
6.0 volts.
Issue:
Display resets or goes OFF when
starting engine.
Possible Remedies:
• Check display supply wires are connect-
ed properly to battery.
• Verify the battery is charged properly.
• Check battery for efcient starter cur-
rent.
Issue:
Display has no backlight.
Possible Remedy:
• Contact an authorized MasterCraft
dealer.
Issue:
Display has no keypad backlight.
Possible Remedy:
• Contact an authorized MasterCraft
dealer.
To Next Page
Loading...
Need help?
General
