Page 3-40 2014 MasterCraft Owners Manual • Gauges & Video Screens
G A U G E S & V I D E O S C R E E N S
Modify Rider Prole
A rider prole can be modied using the
4.5” touch screen.
Function and Description
To modify a prole, press [PROFILE]
on the 4.5” screen.
MODIFY—Touch [MODIFY] to change
an existing prole.
If the name requires modication or to
replace it, touch the name to display the
keyboard. Backspace through the existing
name and type a new name for the prole
using the touch keypad and touch [DONE].
If the name does not require a change,
move to the next step.
Touch the [RIGHT ARROW] to move
to the Speed settings or [LEFT ARROW]
to return to the Name screen.
Touch [RIGHT ARROW] to move to
the Ballast screen.
The ballasts are modied by touching
the ballast to be set and sliding your nger
on the screen to the desired setting. While
the ballast ll indicator is red, the ballast
tanks are not full. When they are lled,
the ballast ll indicator turns green. Touch
[RIGHT ARROW] to move to the Tabs
screen or [LEFT ARROW] to move back
to the previous screen.
Touch [SAVE] to save the rider and set-
tings as modied. The composite prole
can be displayed on the 7” touch screen.
To Next Page
Loading...
Need help?
General
