EasyManuals Logo
Home>MasterCraft>Boat>2014 X46

MasterCraft 2014 X46 User Manual

MasterCraft 2014 X46
285 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #211 background imageLoading...
Page #211 background image
Page 6-18 2014 MasterCraft Owners Manual • Care and Maintenance
C A R E A N D M A I N T E N A N C E
suretheignitionkeyandallaccessoriesare
in the OFF position. Also remember to re-
attach the cables in the proper order, with
the positive cable connected to the positive
[+] post and the negative cable connected
to the negative [-] post.
When charging, batteries generate small
amounts of dangerous hydrogen gas. This
gas is highly explosive. Keep all sparks,
flames and smoking well away from the
area. Failure to follow instructions when
charging a battery may cause an electrical
charge or even an explosion of the battery,
which could result in death or serious injury.
MasterCraft recommends the use of a
spiral-celltypebattery,suchastheOptima
brand. These batteries exceed other batter-
ies in holding and extending a charge.
Inspect the Throttle and Shift Cables
for Kinks, Wear and Interference
Some engine parts become very hot during
operation. This inspection must be complet-
ed while the engine is cool to prevent burns
to your skin. Perform this task before start-
ing the boat.
Step 1: Ensure the engine is OFF and the
enginesafetystartingswitchdiscon-
nected. Be certain that the throttle/
shift control lever is in neutral.
Step 2: Open the engine compartment
and locate the throttle and shift
cables. Follow each cable back
undertheoorboardsandfeelfor
any kinks and wear on the outer
jacket.Anysignofcabledamage
iscauseforreplacement.Seeyour
authorized MasterCraft dealers
service department if you notice
anycabledamage.
Inspect the Fuel System for Leaks
This function should be performed prior
to starting the engine; and then again after
about three (3)-to-ve (5) minutes to deter-
mine whether any leaks are apparent.
Step 1: First ensure the engine is OFF and
theenginesafetystartingswitchis
disconnected. Be certain that the
throttle/shift control lever is in
neutral. The engine must be cool.
Gasoline is highly flammable and its vapors
may ignite, resulting in fire or explosion. Be
sure to keep all sparks and flames away
from the area while inspecting the boat’s
fuel system.
Step 2: Open the engine compartment
and visually check as much of
thefuelsystemfromthe tankto
the engine as you can see. On
some models this is will be a lim-
itedarea.Iftheodorofgasoline

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the MasterCraft 2014 X46 and is the answer not in the manual?

MasterCraft 2014 X46 Specifications

General IconGeneral
BrandMasterCraft
Model2014 X46
CategoryBoat
LanguageEnglish

Related product manuals