Purpose:
Underwater lights provide a signi-
cant improvement in visual illumination
of the water beneath swim platforms and
in the area surrounding the boat stern.
In shallow water, this can be especially
useful in determining safer operations.
Location:
Blue lights, located on the transom
below the waterline.
Operation:
The combination switch is mounted
in an aft position (transom or storage
area) or controlled from the driver’s
armrest. The switch is marked. Press up
on the switch to turn ON (a green LED
light will be lighted when the lights are
operating). Press down to turn OFF.
Also note that the underwater
lights should never be operated unless
the boat is in the water. Even though
these are LED lights, they generate
some heat and require the cooling ef-
fect of the water to avoid premature
burn-out of the bulbs.
Troubleshooting:
1) If lights do not operate, check the main
circuit breaker panel to determine if a
circuit may have tripped. Re-set the cir-
cuit; if it continues to trip, take the boat
to an authorized MasterCraft dealer.
Page 4-30 2014 MasterCraft Owners Manual • Boat Operations
B O A T O P E R A T I O N S
2) If the circuit breaker has not tripped, a
bulb may have burned out. Although
some lights are LED, which rarely burn
out, it is possible. Take the boat to an au-
thorized MasterCraft dealer to have the
bulb replaced.
To Next Page
Loading...
Need help?
General
