Mastervolt chargemaster plus 12/100-3

26
5.2.12 Event target
The ChargeMaster Plus can be configured as an event target by other devices on the MasterBus network. When the
ChargeMaster Plus is configured as an event target by another device, this device can initiate an event command and an
event action to be performed by the ChargeMaster Plus.
Event command
Description
State
Command to switch on the ChargeMaster Plus
Bulk
Command to start the Bulk state of charge
Abs
Command to start the Absorption state of charge
Float
Command to start the Float state of charge
Suspend charging
When using a Li-ion battery MLi Ultra, programming this event is obligatory. Refer to the
manual of the Li-ion battery MLi Ultra.