EasyManuals Logo

Mastervolt chargemaster plus 12/100-3 User Manual

Mastervolt chargemaster plus 12/100-3
31 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #4 background imageLoading...
Page #4 background image
4
1 GENERAL INFORMATION
1.1 USE OF THIS MANUAL
This manual serves as a guideline for the safe and
effective operation and maintenance of the ChargeMaster
Plus
It is therefore obligatory that every person who works on or
with the ChargeMaster Plus must be completely familiar
with the contents of this manual and the Important Safety
Instructions, and that he/she carefully follows the
instructions contained herein.
Installation of, and work on the ChargeMaster Plus may be
carried out only by qualified, authorised and trained
personnel, consistent with the locally applicable standards
and taking into consideration the Important Safety
Instructions.
Copyright © 2017 Mastervolt. All rights reserved.
Reproduction, transfer, distribution or storage of part or all
of the contents in this document in any form without the
prior written permission of Mastervolt is prohibited
1.2 VALIDITY OF THIS MANUAL
All of the specifications, provisions and instructions
contained in this manual apply solely to standard versions
of the ChargeMaster Plus delivered by Mastervolt.
This manual is only valid for the following models with
apparatus version “A” and higher (see section 1.4):
Part number
Model
44310750
ChargeMaster Plus 12/75-3
44311000
ChargeMaster Plus 12/100-3
44320400
ChargeMaster Plus 24/40-3
44320600
ChargeMaster Plus 24/60-3
x = OEM Customer specific number
These models are further mentioned as ChargeMaster
Plus
1.3 USE OF PICTOGRAMS
Safety instructions and warnings are marked in this
manual by the following pictograms:
WARNING
A WARNING refers to possible injury to the
user or significant material damage to the
charger if the user does not (carefully) follow
the procedures.
CAUTION!
Special data, restrictions and rules with regard
to preventing damage.
A procedure, circumstance, etc which
deserves extra attention.
1.4 IDENTIFICATION LABEL
Figure 1: Identification label
The identification label is located at the right-hand side of
the ChargeMaster Plus. (see figure 1) Important technical
information required for service, maintenance & secondary
delivery of parts can be derived from the identification
label.
CAUTION!
Never remove the identification label.
1.5 LIABILITY
Mastervolt can accept no liability for:
consequential damage due to use of the
ChargeMaster Plus;
possible errors in the manuals and the results thereof.
Serial number
YMDDA0001
Device version “A”
Part number

Table of Contents

Other manuals for Mastervolt chargemaster plus 12/100-3

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Mastervolt chargemaster plus 12/100-3 and is the answer not in the manual?

Mastervolt chargemaster plus 12/100-3 Specifications

General IconGeneral
BrandMastervolt
Modelchargemaster plus 12/100-3
CategoryBattery Charger
LanguageEnglish

Related product manuals