To Next Page

To Previous Page

CombiMaster 120V Series –

User and Installation Manual

4.4 Connection examples

These schematics illustrate the general placement of a standalone CombiMaster Inverter/Charger in a

circuit. It is not meant to provide detailed wiring instructions for any particular electrical installation. For

information on multi-unit configurations, see chapter 7.

4.4.1 Models 1500W, 2000W, 3000W

Figure 4: Installation drawing for models with product code: 35511500, 35512000, 35513000,

35522000, 35523000

Table of Contents2
Safety Instructions3
General3
Warnings Regarding the Use of Batteries4
Location5
Connections5
Warning Regarding Life Support Applications5
General Information6
Liability6
Warranty6
Identification Label6
Correct Disposal of this Product6
Product Description7
Overview of the Connections7
Models 1500W, 2000W, 3000W7
Models 3500W, 4500W, 5000W8
Operating Modes8
Protection10
Installation11
Unpacking11
Location11
Batteries12
Connection Examples13
Models 1500W, 2000W, 3000W13
Models 3500W, 4500W, 5000W14
Wiring15
DC Wiring15
AC Wiring16
AC Safety Grounding17
Network Wiring (Czone/Masterbus)18
Tools and Materials Needed19
Installation Step-By-Step20
Accessories Connector (Dry Contacts)23
Remote Switch24
Output24
Settings25
DIP Switch Settings25
Masterbus Configuration26
Monitoring Tab26
Alarms Tab28
History Tab28
Configuration Tab28
Events Tab - System Automation31
Czone Configuration32
Operation34
Switching on / Charge Only34
Status Leds34
Remote Control35
3-Step+ Charge Process35
Temperature Compensated Charging36
Reset the Thermal Breaker after an Overload36
Maintenance37
Decommissioning37
Storage and Transportation37
Parallel and Split-Phase Systems38
General Information38
Materials Needed39
Preparations39
DC Wiring40
AC Wiring41
AC Wiring of Single-Phase Parallel Units42
AC Wiring of Split-Phase Units (One Unit for each Phase)43
AC Wiring of Split-Phase (Two Parallel Units for each Phase)45
Network Wiring46
Preparation46
Network Wiring of Single-Phase Parallel Units47
Network Wiring of Split-Phase Units47
Network Wiring of Two Units in Split-Phase with Two Units in Parallel48
Configuration and Initial Start-Up48
DIP Switches (for a Single-Phase Parallel Configuration in a Basic Masterbus System)49
Masteradjust50
Czone Configuration Tool51
Breaking down a Cluster53
Troubleshooting54
Technical Data56
Inverter Specifications56
Charger Specifications57
Transfer System Specifications59
Miscellaneous60
Czone Specifications60
Characteristics61
Dimensions62

Brand	Mastervolt
Model	CombiMaster 120V Series
Category	Battery Charger
Language	English

Mastervolt CombiMaster 120V Series User Manual

Table of Contents

Questions and Answers:

Mastervolt CombiMaster 120V Series Specifications

Related product manuals