20 Matrix ETERNITY NE Quick Start
• After loading the firmware, the phone will prompt you to change Network
Settings.
• Press Enter key to select ‘No’ or wait for three seconds.
If you want to change the Network Settings, you may select ‘Yes’, by moving the cursor to Yes
with the Up key and pressing the Enter key.
• The phone makes DHCP Discovery and fetches its IP Address and Server IP
Address from the ETERNITY NE.
On getting the IP Address, the phone initiates Auto Configuration to download
the configuration files from ETERNITY NE.
• As the phone downloads the configuration files, the file names will appear one
by one.
C h a n g e N e t w o r k S e t t i n g s ?
To Next Page
Loading...
