Matrix ETERNITY NE Quick Start Guide

Matrix ETERNITY NE Quick Start 3
Installing ETERNITY NE
Preparing for Installation
Have the items listed below ready:
• A suitable location to install the ETERNITY NE.
• Necessary telecom wiring in place, with wall jacks for extension lines at the
required locations.
• Standard, good quality, twisted pair telephone cables with 0.5 mm conductor
diameter, with RJ11 plugs.
• A dedicated Power supply outlet close to the system.
• As many standard analog telephone instruments as you want to connect as SLT
extensions. You may select any standard telephone instrument like rotary
phone, Pulse/Tone switchable push-button phone, Feature phone or Cordless
phone.
• A fax machine, if you want to connect one to the SLT port of ETERNITY NE.
• One or two digital keyphones (Matrix proprietary phones), as required, to
connect as DKP extensions.
• One or more active, analog trunk lines from the CO network, as required.
• A SIM card to test mobile network connectivity, if GSM/UMTs module is to be
installed.
• SIP Account information to be configured in the system to test SIP calls, if the
VoIP module is to be installed.
• Any standard Open IP Phone or the Matrix Extended IP Phone to register as
SIP Extension of ETERNITY NE, if required.
• The Pen Drive and the License Voucher if Voice Mail System (VMS) module is
to be installed.

Matrix ETERNITY NE Specifications

General

Brand	Matrix
Model	ETERNITY NE
Category	PBX
Language	English