Matrix ETERNITY NE Quick Start Guide

Matrix ETERNITY NE Quick Start 25
How to access Jeeves
ETERNITY NE provides an embedded web server with a graphic user Interface
(GUI), Jeeves, for configuration.
To access Jeeves, you will need to connect a computer to ETERNITY NE.
Connecting a Computer
You may connect a standalone computer to ETERNITY NE or grab any computer
connected in the same LAN as ETERNITY NE.
Connect a standalone computer to ETERNITY NE, when installing the system for the very first
time. You may connect it to a computer on LAN at a later stage, once you have finished
installation and configuration of the system.
To connect a standalone computer,
• Plug one end of the RJ45 cable supplied into the Ethernet Port of ETERNITY
NE. Plug the other end into the LAN port of the computer.
• Make sure the IP Address of the computer and the Ethernet Port of ETERNITY
do not conflict, and that both are in the same Subnet.
The default IP Address of the Ethernet Port of ETERNITY is: 192.168.1.101
The default Subnet Mask of the Ethernet Port of ETERNITY is: 255.255.255.0
LAN Port
Ethernet Port

Matrix ETERNITY NE Specifications

General

Brand	Matrix
Model	ETERNITY NE
Category	PBX
Language	English