Matrix ETERNITY NE Quick Start 23
Technical Specifications of the Door Phone Port
Technical Specifications of the Digital Output Port
• Plug the RJ45 end of the cable supplied for the Door Phone port into the Door
Phone connector of ETERNITY NE. Connect the free end of the cable to the 4-
wire door phone.
If connecting a Door Lock release, connect the free end of the cable to the Door
Lock release device.
Refer to the pinout details of the Door Phone port to connect the wires correctly.
Pinout Details of Door Phone Connector
Specification Value
Speaker Output 1.41Vrms (max); Single Ended
Mic Input 1.34Vrms (max); Single Ended
Specification Value
Relay Type Power Relay
Contact Arrangement Normally Open; 1-Form-A
Contact Rating
(Resistive Load)
1.0Amp; 24VDC
Operation Time: 8ms (max.)
Connector Pin Port Connection Color
RJ45
1 Digital Output Port Relay A Orange - White
2 Relay B Orange
3 Door Phone Status Green - White
4 MIC Input Blue
5 Speaker Output Blue - White
6 Analog Ground Green
7 No connection
8 No connection
To Next Page
Loading...
