Matrox Monarch HDX - Page 26

10
Chapter 2, Matrox Monarch HDX Hardware and Connections
connecting an HDMI monitor to Monarch HDX's HDMI output. To select
whether to stream and record the first two audio channels present in the HDMI
input or the audio connected to the Monarch HDX analog audio input, see
“Audio Input Settings” on page 26.
SDI out
Provides a preview of the selected SDI or HDMI input. For audio, you have the
following options:
• Use the first pair of embedded HDMI audio channels.
• Use the 16 SDI audio channels.
• Use the analog pair.
¦NoteFor more information, see “Audio Input Settings” on page 26.
To monitor your input source, the SDI monitor must support the video input
format.
SDI in
Provides an input for SDI video (YUV only) from an SDI device for streaming
and recording. The SDI input supports the following video input formats:
• 1920 × 1080p at 23.98/24/25/29.97/30/50/59.94/60 fps
• 1920 ×1080i at 25/29.97 fps
• 1280 × 720p at 50/59.94/60 fps
• 720 × 576i 25 fps
• 720 × 486i at 29.97 fps
Monarch HDX supports the first two channels of uncompressed embedded audio
from the SDI input source for streaming and recording. You can monitor the SDI
input source by connecting an SDI monitor to Monarch HDX's SDI output. To
select whether to stream and record the first two audio channels present in the
SDI input or the audio connected to the Monarch HDX analog audio input, see
“Audio Input Settings” on page 26.
AUX
The AUX connector is currently for internal use only.
Analog audio output
Provides an unbalanced stereo analog audio output for monitoring the audio
selected as the audio input source.
The analog audio output will always be in sync with the HDMI video output
when coming from embedded SDI or HDMI inputs or analog input as long as this
analog signal is already in sync with the selected video input.