44
11921 Slauson Ave. Santa Fe Springs, CA. 90670 (800) 227-4116 FAX (888) 771-7713
STEP 7 - ATTACH PUMP & BATTERY BOX FRAME TO
VEHICLE - Continued
Cover pump box and optional battery box with fl ame-resistant covering before
welding pump box frame to vehicle.
CAUTION
To prevent pump box components from being damaged by electric current from
welding, connect welder grounding cable to the part being welded.
CAUTION
WELDING PUMP & BATTERY BOX FRAME
FIG. 44-1
CROSS
MEMBERS
CROSS
MEMBER
BRACKET
3/16”
3/16”
3/16”
IF ACCESSIBLE
4. Weld each bracket to cross
members as shown in FIG.
44-1. Weld top of bracket if ac-
cessible.
To Next Page
Loading...
