11921 Slauson Ave. Santa Fe Springs, CA. 90670 (800) 227-4116 FAX (888) 771-7713
20
EXTENSION
PLATE
BRACKET
(2 PLACES)
BOLTING ON INSTALLATION BRACKETS
FIG. 20-2
CAP SCREW
1/2”-13 X 1-1/2” LG.
(2 PLACES)
HEX NUT
1/2”-13
(2 PLACES)
2. Bolt 2 installation brackets (parts bag items) on the
extension plate as shown in FIG. 20-2. Tighten hex
nuts securely.
EXTENSION PLATE WELDS - VIEWED FROM UNDERNEATH
FIG. 20-1
3/16”
EXTENSION
PLATE
VEHICLE
BODY
WELD LENGTH & SPACE:
2”- 11 3/4” ( 96”W VEHICLE)
2”- 12 1/2” (102”W VEHICLE)
NOTE: During installation of liftgate, installation brackets keep
the heel of the platform level with extension plate and
maintain a ¾” gap between extension plate and heel of
platform. The extension plate has bolt holes for bolting
on the installation brackets provided in parts box.
STEP 1 - ATTACH EXTENSION PLATE TO VEHICLE -
Continued
To Next Page
Loading...
