Maxon GPTLR-44 - Vehicle Requirements and Clearances; Body Height and Clearance Requirements

11921 Slauson Ave. Santa Fe Springs, CA. 90670 (800) 227-4116 FAX (888) 771-7713
9
1. Check for correct clearances (FIGS. 9-1 and 9-2)
on vehicle to prevent interference between vehicle
and Liftgate. Refer to FIGS. 10-1, 11-1, and 11-2
for additional clearances and dimensions.
GPTLR-25 & -33 LIFTGATE CLEARANCE DIMENSIONS (FOR REFERENCE)
FIG. 9-1
36”
GPTLR-44 & -55 LIFTGATE CLEARANCE DIMENSIONS (FOR REFERENCE)
FIG. 9-2
VEHICLE REQUIREMENTS
NOTE:
• BODY maximum and minimum operating bed height for GPTLR-25, GPTLR-33,
GPTLR-44, & GPTLR-55 with standard platform:
Maximum height is 55” (Unloaded). Minimum height is 44” (Loaded). If Liftgate is
equipped with Canadian (CMVSS) underride, minimum height is 49”. Refer to
Canadian underrides listed in OPTIONS, and underride adjustment procedure.
• Make sure vehicle is parked on level ground while preparing vehicle and installing
Liftgate.
• On vehicle bodies equipped with swing open doors, the extension plate and vehicle
body must be modifi ed to install this Liftgate.
• Dimensions are provided as reference for fi tting Liftgate to vehicle body.
55” MAX. BED HEIGHT (UNLOADED)
44” MIN. BED HEIGHT (LOADED)
21-3/8” MAX.
10-3/8” MIN.
25-3/8”
23-1/4”
55” MAX. BED HEIGHT (UNLOADED)
44” MIN. BED HEIGHT (LOADED)
38”
21-3/4” MAX.
10-3/4” MIN.
24-1/2”
26-3/4”
14”
33-3/4”
36”
14”